Photo by Madelon Van der kerk

Connecting to Network Printers

You can connect to the Quant lab printer following these steps:

*Note: If using a personal laptop, you must use the VPN to print to UF printers.

  1. Open up My Computer, and type the address \\\ in the address bar at the top of the window. You will get a list of all the printers on the network. (See picture of this step).
  2. If you are prompted for your username and password, you must use the format UFAD\gatorlinkusername in the username box, and your gatorlink password for the password. (See picture of this step)
  3. Find the name of the printer you wish to connect to from the list below. Find that printer in the window, right click on it, and select connect. (See picture of this step)
    • wec-quantlab3330 - Quant Lab Newins-Ziegler 368
    • WEC-Xerox7328-Black - Wisely/Austin Lab Building 116
    • wec-d2350dn - McCleery Lab Newins-Ziegler Basement 2
    • WEC-dell2330dn - Pine Lab Building 87
    • WEC-Xerox7835-Black - Coop Building 810
    • wec-FletcherLab - Fletcher/Oli Lab Newins-Ziegler 218
    • WEC-BroL2360dw - Branch Lab Building 737

You will now have the choice of printing to this printer in any application.

Note: If you get an access denied error when attempting to connect to the print server, you need to email Tom Barnash to be added to the permission list for the printer.